Main features of this collector are: high filtering capacity, maximum efficiency, ease of use, small space requirement considering its filtering surface, self-cleaning system, electric panel, cable and plug, ready to be used.

Structure

MFC11 collector consists in self-supporting panels of sturdy galvanized steel, processed by numerically controlled punching machine and pressformed by 6-axis bender. All panels are trimmed with silicone sealant and bolted together with high-strength bolts.
The central body contains the real filtering heart of the machine: cartridged and tank.
On the aspiration side, it is possible to make opens (upon request) to connect flexible pipes or a self-supported arm.

Filtering cartridges are made of polyester fabric (antistatic upon request), produced using a spunbonded procedure which ensures no variation on air permeability and allows greater filtering efficiency and high stability. Electrical conductivity on the fabric surface is obtained thanks to aluminium powder application, which mantains the fabric porous.
This kind of process is suitable to remove electric charges given by powders to be filtered, and by them transmitted to the filter media.
Cartridges’ self-cleaning system consists in compressed air backwash. It is a totally automized system, equipped with storage tank.

Valves are of anodized cast aluminum and are suit of bulkhead fitting totally in stainless steel. The membrane is instead of special rubberized canvas marked by very high mechanical resistance. Tank is equipped with threaded connection fittings for power supply, lower connectors with condensate drain pipe. Cartridge access door on the top of the collector eases cleaning and maintenances. The door is a press-formed panel closing with sealing gasket. The integrated electric aspirator is specifically designed and it is made up of directly coupled engine and impeller. In its upper part, there is the air exhaust open with rectangular outlet suitable to connect a pipe (available on request). Powders are extracted through a hopper and collected in the drawer, or in a plastic bag, located in the lower part container (optional). Cartridge filter collector MFC11 on trolley is delivered equipped with automatic circuit breaker to control aspiration and wheels.

L'articolo Cartridge filter collector for fumes and dust on trolley sembra essere il primo su Gamma impianti.

ADVANTAGES

• Quick: fumes suction straight from the source thanks to a high flow rate.
• Mobile: it can reach any working station.
• Drawer collector of powders and chips, located in the lower part of the machine. Available with nylon bag.
• Filtration: with absolute filter H13 ≥99.95%.
• Self-clening of filters with compressed air.
• 1100W single-phase power easy connectable via Shuko socket.
• Easy maintenance: thanks to self-cleaning.

Size

Technical data

• Supporting structure of strong galvanised sheet:
• Filtering surface 20mq with cellulose/polyester/antistatic polyester cartridges;
• Compressed-air self-cleaning system;
• Incorporated fan single- or triple-phase 1,1 to 2,2KW;
• Collector drawer;
• On/off aspirator switch;
• Settable timer for filter cleaning;
• Electrical cable with plug;
• Handlings to move;
• Max temperature 80°C

Accessories and Extras

• 3mt suction arm;
• Filter media for specific powders;
• ATEX components zone 22 3D available;
• Absolute filter for ejection;
• AISI304 steel structure;
• Smooth or orange peel varnishing.

L'articolo Mobile cartridge purifier for fumes and dust sembra essere il primo su Gamma impianti.

ADVANTAGES

• Double suction arm for maximum level of flexibility.
• Safety granted: led alarm on the panel warns when filters need maintenance.
• Quick: fumes suction straight from the source thanks to a high flow rate.
• Mobile: it can reach any working station.
• Filtration: with absolute filter H13 ≥99.95%.
• 1500W single-phase power easy connectable via Shuko socket.
• Easy maintenance: primary filter has 500 hours of life.

How the purifier works Pollutants are aspired from the flexible suction arms. Then, pollutants are filtered to 99,95% of efficiency while crossing the purifier towards the bottom. Finally, odours are absorbed by active carbons. Once air is clean, it is returned back into the environment via grids located on both sides of the machine. Environment safety Level of clogging is constantly monitored by a system with a led signal, which advise when it is necessary to clean or substitute filters.

Technical data

Rated capacity 1.500 mc/h
Engine power 1,5kW 220/1/50
Total weight 110 kg ca
Filtration:
Stage 1 – sparkproof metallic filter G3
Stage 2 – acrylic filter G4 (following EN 779:2012)
Stage 3 – absolute filter H13 ≥99.95% (@ MPPS following EN 1822:2009)
Stage 4 – active carbons filter for odours

Structure

Supporting structure of strong galvanised or powder-coated iron, with practical handles and 4 pivoting wheels with brake.
Electrical panel in accordance with CE rules, with on/off switch for ventilation and warning led for filter clogging.
Centrifugal fan with simple inlet, directly paired to asynchronous single-phase engine.

Size

L'articolo Double arm trailer-mounted purifier for welding fumes sembra essere il primo su Gamma impianti.

ADVANTAGES

• Quick: fumes suction straight from the source thanks to a high flow rate.
• Mobile: it can reach many welding working spots.
• Filtration: with absolute filter H13 ≥99.95%.
• 1500W single-phase power connectable with a simple Shuko outlet.

How does it work MFU16 aspires pollutants from a flexible pipe or a suction arm. Then, pollutants are filtered to 99,95% of efficiency while crossing the purifier towards the bottom. Finally, any odour is absorbed by active carbons. Once air is clean, it is returned back into the environment via grids located on both sides of the machine. Environment safety Level of clogging is constantly monitored by a system with a led signal, which advise when it is necessary to clean or substitute filters. Extraction Accessories 3 mt WH extraction arm with hood, handle and rigid aluminium piping; 3 mt WF SUPERFLEX extraction arm with hood, handle and black hose; 160 mm. diam. single connecting piping; 125 mm. diam., double connecting piping.

Technical data

Rated capacity 1.500 mc/h
Engine power 1,5kW 220/1/50
Total weight 110 kg ca
Residual pressure 500 Pa
Filtration:
Stage 1 – sparkproof metallic filter G3
Stage 2 – acrylic filter G4 (following EN 779:2012)
Stage 3 – absolute filter H13 ≥99.95% (@ MPPS following EN 1822:2009)
Stage 4 – active carbons filter for odours

Structure

Supporting structure of strong galvanised or powder-coated iron, with practical handles and 4 pivoting wheels with brake.
Electrical panel in accordance with CE rules, with on/off switch for ventilation and warning led for filter clogging.
Centrifugal fan with simple inlet, directly paired to asynchronous single-phase engine.

Size

L'articolo Mobile extractor MFU16 for welding fumes sembra essere il primo su Gamma impianti.

Mobile purifier MFU is designed for aspiration and filtration of micropowder from ionized air blowing to detach particles from components within productive or assembly lines.
Air purifier MFU can be easily moved where it’s needed thanks to compact size, wheels and convenient handlings, and coveniently connected through its inlets.

Applications

• Assembly and testing benches
• Production lines
• Special machines

How the mobile purifier works Pollutants are filtered to 99,95% of efficiency while crossing the purifier towards the bottom. Finally, any odour is absorbed by active carbons. Once air is clean, it is recycled back into the environment through grids located on both sides of the machine.

Accessories

• single pipe inlet diam.160mm
• double pipe inlet diam.125mm
• multiple side inlet

 

Technical data

Rated capacity:      1.500 mc/h
Engine power:        1,5kW 220/1ph/50Hz  (a richiesta versioni a 60Hz)
Final filtration:      E13 <99,95% secondo EN1822
Total weight:          110 kg ca

 

Size

 

Structure

Supporting structure of strong galvanised or powder-coated iron, with practical handles and 4 pivoting wheels with brake.
Electrical panel in accordance with CE rules, with on/off switch for ventilation and warning led for filter clogging.
Centrifugal fan with simple inlet, directly paired to asynchronous single-phase engine.

 

L'articolo Air purifier for production lines and assembly benches sembra essere il primo su Gamma impianti.

Structure

• robust support plate 770×410 mm
• lateral channel blower of die-cast aluminium and directly coupled to a three-phase engine
• 10 lt AISI430 container with quick release system
• polyester filtering cartridge with 99.999% efficiency
• 50 mm diam. extraction hose attachment

Technical data

Engine: 1.5 KW 220/400 Volt. 50 Hz. Phase
Rated flow: 210 m3/h
Max vacuum: 200 mbar
Sup. Filter: 1,300 cm2
Sound level: 64 dBA
Size: 770x410xH430 mm
Overall weight: 36 kg

Thanks to the AISI 430 container with quick release system, management of sucked powder is fast and easy.

polyester cartridge filter for fumes and powders

L'articolo HVM150 high-pressure cartridge purifier sembra essere il primo su Gamma impianti.